Alarms 7100A
Activation: Alarm is armed by turning key clockwise. Low audible chirp indicates alarm has been activated. Alarm will sound when the exit device touchbar is depressed. Factory preset for standard alarm mode which automatically resets after 5 minutes.
Continuous Alarm Mode: Alarm sounds continuous when the exit device touchbar is depressed. Alarm must be manually reset by keyswitch. (This feature is selected by a switch on the circuit board.)
Low Battery Warning: Audible chirp.
Warning Decal: "EMERGENCY EXIT-ALARM WILL SOUND"
Nuisance Alarm: Factory preset for instant alarm. Selectable feature for alarm to sound when exit device touchbar is depressed for more than 2 seconds. (This feature is selected by a switch on the circuit board.)Kit: Available in kit form for field retrofit.
Arming Delay/ Authorized Egress: 10 Second delay (after arming) permitting egress (by turning key clockwise).
Alarm Shunt: Ingress shunt alarm input for devices with bolt status "S" monitor. NOTE: "S" included with SVR devices.
Power Requirements: One 9 Volt Battery (included).
Loudness: 90 db @ 10 feet.
Arm / Disarm: Uses one 1-1/8" straight cam mortise cylinder. Clockwise turn arms the alarm, counter clockwise turn disarms or silences the alarm.
Device Status: A red LED indicator will illuminate every 30 seconds when the alarm is armed.
Tamper Resistant: Built in safety monitor sounds alarm when tampering occurs.